Variable Name: PRM_2457

Variable ID: 0x4222

Variable Label: Fault t-1

Variable Help: Shows the kind of 2. error and when it occurred

Variable Handling: R

Variable Class: Device

Variable Size: 2

Variable DataType: Enum

Variable Enum Value	Variable Enum Text
0x0000	None
0x0001	Torque OPEN
0x0002	Torque CLOSE
0x0003	Actuator start monitor.
0x0004	Direction monitoring
0x0005	Thermal overload
0x0006	Electronic overtemp.
0x0007	dummy
0x0008	Fail safe
0x0009	Hardware failure
0x000A	Encoder failure
0x000B	Encoder setup failure
0x000C	Torq. inp. gear exceed.
0x000D	Valve torque OPEN
0x000E	Valve torque CLOSE
0x000F	Systemtest fault
0x0010	24V internal failure
0x0011	24V external failure
0x0012	Phase 1 failure
0x0013	Phase 2 failure
0x0014	Phase 3 failure
0x0015	Phase correction failure
0x0016	Battery backup malf.
0x0017	24V external overload
0x0018	Emerg. shutdown (ESD)
0x0019	Discrepancy error
0x001A	Wrong power unit
0x001B	Emergency-STOP
0x001C	OFF mode
0x001D	LOCAL mode
0x001E	Mode not REMOTE
0x001F	Testmode enabled
0x0020	Simulation mode active
0x0021	Configuration invalid
0x0022	NV-Memory failure
0x0023	HW interface failure
0x0024	Device key invalid
0x0025	Encoder overflow
0x0026	Encoder range error
0x0027	dummy
0x0028	Limit valve strokes
0x0029	Accum. operation cycles
0x002A	Current op. cycles/h
0x002B	Op-time survey OPEN
0x002C	Op-time survey CLOSE
0x002D	Gasket change recomm.
0x002E	Gear overhaul recomm.
0x002F	dummy
0x0030	Torque warning OPEN
0x0031	Torque warning CLOSE
0x0032	Handwheel operation
0x0033	Maintenance required
0x0034	Int. positioner disabled
0x0035	Position calibr. failure
0x0036	Torque calibr. failure
0x0037	Analog inp. calibr. failure
0x0038	Interlock LOCAL
0x0039	Interlock REMOTE
0x003A	dummy
0x003B	dummy
0x003C	TMS Module Error
0x003D	RTC Error
0x003E	RTC not set
0x003F	RTC battery low
0x0040	FO module error
0x0041	FOC budget ch. 1
0x0042	FO failure ch. 1
0x0043	FOC budget ch. 2
0x0044	FO failure ch. 2
0x0045	dummy
0x0046	dummy
0x0047	dummy

Variable Display Format:

Variable Edit Format:

Variable Unit:

Variable Max: N/A

Variable Min: N/A

Variable Read Command List

Command Number	Command ID	Command Name
160	443F	cmd160_read_prm

Variable Write Command List

None