Loading…
Name ID Label Description Type Access Class
alarmNamurConfiguration_44 421C Switchpoint 1 exceeded R/W Enum 0
alarmNamurConfiguration_45 421D Switchpoint 2 exceeded R/W Enum 0
alarmNamurConfiguration_46 421E Analog output supply fault R/W Enum 0
alarmNamurConfiguration_47 421F Pressure measurement defect R/W Enum 0
valveTravelCounterHysteresis 431D Min travel value Here, you can define the range that you want the counter to interpret as a movement. You can configure the hysteresis within the range of 1...100%.The factory setting for the hysteresis is 1.0%. R/W Float 8
scaledOutExtremum_1 452B Scaled out extream max R/W Float 8
aoAlarmMapping_1 42DE Off specification R/W Enum 8
aoAlarmMapping_2 42E0 Maintenance R/W Enum 8
aoAlarmMapping_3 42E2 Failure R/W Enum 8
UniversalAItabOpCode 436F UniversalAI TabOpCode The modification of a table in a device influences the measurement or actuation algorithms of the device.Therefore an indication of a starting and an end point is necessary. TabOpCode controls the transaction of the table R/W Enum 8
Name ID Label Description Type Access Class