Loading…
名称 ID 标签 描述 类型 访问 分类
PV_Unit 4021 PV unit 现场设备变量单位——使用数值表示、最小范围、范围上限、范围下限、传感器上限和传感器下限显示的工程单位。 读/写 枚举 32
RJ_Max_Indicator 403F Max RJ value Shows the maximum RJ value. 读 浮点 34
RJ_Min_Indicator 4040 Min RJ value Shows the minimum RJ value. 读 浮点 34
Extended_Functions 4030 Drift alert mode Enables the seneor drift monitioring Alarm: The 'Caution' icon becomes active on the display. The device switches to error signal. Warning: The 'Caution' icon becomes active on the display. A warning is transmitted via the HART protocol. 读/写 枚举 2048
Drift_Underusage 4074 Drift mode Higher: Warning or alarm is activated in case of exceedance of chosen deviation value. Lower: Warning or alarm is activated in case of under-usage of chosen deviation. 读/写 枚举 2048
Drift_Alert_Value 4031 Drift alert value Define the deviation set point for before chosen warning or alarm. 读/写 浮点 2048
Alarm_Ambient_Temp 400F Ambient alert Activate the ambient temperature alarm. If the parameter OFF is selected only a warning is issued on exceeding the specification. If ON is selected then an alarm is initiated when this value is exceeded. 读/写 枚举 2048
Filter_50_60_Hz 4033 Mains filter Select power filter, dependent on matching frequency of individual power networks. 读/写 枚举 2048
Corrosion_Detection 4032 Corros. detection Switch corrosion monitor on or off. 读/写 枚举 2048
Failure_Tolerance 4068 Alarmhysteresis Hysteresis switch for the analog output in case of alarm. Possibilities are off, 2 seconds or 5 seconds that analog output freezes in case of alarm. 读/写 枚举 2048
名称 ID 标签 描述 类型 访问 分类