Loading…
名称 ID 标签 描述 类型 访问 分类
Temperature_Threshold 4073 Temperature T Threshold temperature T when device switches to sensor 1. If temperature at Sensor 1 drops below temperature T PV value is sensor 1 again. 读/写 浮点 2048
Display_Mode 4034 Display It is possible to change the display mode. With this parameter you can select the displayed values. The corresponding value can be taken from the operating instructions. 读/写 位枚举 2048
Display_PV_Text 406A Display text In this parameter a text can be entered that appears in the display on PV indication. 读/写 压缩文本 256
Decimal_Places 406B Decimal places With this parameter the amount of decimal places shown for values (e.g. PV, RJ...) on the display can be set between none, one and two. 读/写 枚举 2048
Display_Time 406C Display interval With this parameter the duration of the different displaymodes can be set in seconds. The minimum is 2 seconds. 读/写 枚举 2048
Sensortype_0 4006 Sensor type S1 Allocation of sensor 1 sensor type using a selection list. 读/写 枚举 2048
Sensor_Connection_0 4007 Sensor connect. S1 Allocation of connection mode (2-/3-/4-wire) on resistance thermometers and resistance transmitters. 读/写 枚举 2048
RJ_Mode_0 4022 Cold junction S1 For TC input only. Selection of cold junction position. Internal: The temperature measured by the internal cold junction of the transmitter is used as compensation. External: The preset temperature is used for compensation. 读/写 枚举 2048
RJ_Fixed_Value_0 4023 External temp. S1 Fixed preset temperature. This is the temperature used for compensation when measuring using thermocouples. 读/写 浮点 2048
Two_Wire_Comp_0 4024 2-wire comp. S1 Correction value for compensation for the cable resistance when using 2 wire RTDs. 0 Ohm to 30 Ohm can be set up. 读/写 浮点 2048
名称 ID 标签 描述 类型 访问 分类