Loading…
Name ID Label Description Type Access Class
var_ds_dtPlateauTableDate 403C Plateau Date R HartDate 2048
var_ds_uiPlateauTableIndex 403D Plateau Index Plateau Index Active plateau table Index R/W Unsigned 2048
var_ds_fPlateauHV 403E Plateau HV Plateau HV HV of active displayed plateau table entry R Float 2048
var_ds_fPlateauImpulses 403F Plateau Impulses Plateau Impulses Impulses of active displayed plateau table entry R Float 2048
var_dd_fPMTCurrent 4040 PMT Current PMT Current Displays active current at multiplier R Float 2050
var_dd_fPMTCurrentMax 4041 PMT Current Max PMT Current Max Displays the maximum PMT current measured since last reset. R Float 2050
var_ds_ePMTReset 4042 Reset Current Extrema R/W Enum 8
var_ds_fErrorCurrent 4043 Error Current Value Error Current Value Here you define the fault current in mA, if you have selected Value in the "Loop Alarm Type" parameter. If you have selected High or Low, then the appropriate current value is displayed here. If you exceed the mA value, then Value is set in the "Loop Alarm Type" parameter. R/W Float 64
var_ds_fCurrentLowerLimit 4044 Current Lower Limit Current Lower Limit Lower limit of the current range for the 4-20 mA current output. For adjustment purposes or to safely identify an over or under measuring range condition, the current range available for the measurement signal is extended beyond the standard range of 4 mA and 20mA. According to the Namur specifications (NE 43), the lower current value must not be less than 3.8 mA. The limits can be set within the range from 3.8 mA to 4 mA. R/W Float 64
var_ds_fCurrentUpperLimit 4045 Current Upper Limit Current Upper Limit Upper limit of the current range for the 4-20 mA current output. For adjustment purposes or to safely identify an over or under measuring range condition, the current range available for the measurement signal is extended beyond the standard range of 4 mA and 20mA. According to Namur specifications (NE 43), the upper current value must not be higher than 20.5mA. The limits can be set within the range from 20 mA to 20.5 mA. R/W Float 64
Name ID Label Description Type Access Class