Loading…
Name ID Label Description Type Access Class
dec_sensor_family 4098 Sensor Family Семейство устройств - указывает семейство (например, давление, температуру, расход и т. д.), которому принадлежит переменная устройства R Enum 2048
dec_sensor_serial_number 400D Сер ном сенс PV Серийный номер сенсора - служит уникальным идентификатором сенсора, по которому в первую очередь выводится представление цифрового значения или переменная полевого устройства R Unsigned 2048
dec_log_request 400E Event log request W Enum 4096
dec_password 400F Set Password The password is used to validate the command to enable or disable writes in the device. W ASCII 2052
dec_range_units 4099 Ед. изм. диапазона PV Единицы измерения переменной полевого устройства - ед.изм., которые должна отображаться с 'Числовым значением', 'Минимальным диапазоном', 'Значение верхнего предела диапазона', 'Значение нижнего предела диапазона', 'Нижний предел сенсора' и 'Верхний предел сенсора' R/W Enum 2048
dec_write_enable 4010 Set Write Protect Used to set the write protect mode. With Write Protect (On), variables cannot be written to the device and commands that cause actions to be performed in the device cannot occur. W Enum 2052
x2200_bit_fire_status 401F Fire Indicates (Y) if the device is in a fire alarm status. - analog output is at 20mA, fire alarm relay is actuated and LED is red. R Enum 2051
x2200_bit_uv_alarm 4020 UV Alarm Indicates (Y) if the UV detector is signaling an alarm. R Enum 2051
x2200_bit_ir_alarm 4021 IR Alarm Indicates (Y) if the IR detector is signaling an alarm. R Enum 2051
x2200_bit_tdsa_alarm 4022 TDSA Alarm Indicates (Y) if the IR detector is signaling a TDSA alarm. R Enum 2051
Name ID Label Description Type Access Class