Loading…
Name ID Label Description Type Access Class
gasMaximumLTP 400A Gas Max lower trim Maximum Lower Trim Point- The highest applied process value that can be used duirng a low trim procedure (ie, no value higher than this will be accepted by the instrument). R Float 0
gasMinimumUTP 400B Gas Min upper trim Minimum Upper Trim Point- The lowest applied process value that can be used duirng a high trim procedure (ie, no value lower than this will be accepted by the instrument). R Float 0
gasMaximumUTP 400C Pres Max upper trim Maximum Upper Trim Point- The highest applied process value that can be used duirng a high trim procedure (ie, no value higher than this will be accepted by the instrument). R Float 0
gasMinimumTrimDiff 400D Gas Min trim diff Minimum Trim Differential- The minimum acceptable difference between the upper and lower trim points. R Float 0
gasStatus 400F Gas Fmly stat Device Family Status- Indicates additional status information on a device variable for a specific device family. R BitEnum 10
gasClassification 4010 Gas Class Classification- Indicates the unit code expansion table used for a particular dynamic or device variable. R Enum 0
gasFamily 4011 Gas Dev fmly Device Family- Indicates the family (i.e, pressure, temperature, flow, etc.) that the device variable belongs. R Enum 2048
gasUSL 4012 gas upper sensor limit R/W Float 0
gasLSL 4013 gas_lower_sensor_limit R Float 0
gasMinimumSpan 4014 gas_minimum_span R Float 0
Name ID Label Description Type Access Class