Loading…
Loading…
Name | ID | Label | Description | Type | Access | Class |
---|---|---|---|---|---|---|
cSupplyPresUnit_cmd3 | 4108 | Supply Pressure Unit from command 3 | Pressure Unit for TV The Supply pressure reported by the SVI II AP can bein psi, bar or kPa(for TV) | R | Enum | 10 |
cP2PresUnit_cmd3 | 410B | P2 Pressure Unit for double actuator from command 3 | P2 Pressure Unit for QV The actual pressure reported by the SVI II AP can bein psi, bar or kPa(for QV) | R | Enum | 10 |
cPosUnits | 40F8 | Position Unit | Position Unit- Unit for valve position | R | Enum | 10 |
cSwitch1Dir | 4076 | DO Switch 1 Normally | Define Switch 1 is normally closed or open. | R/W | Enum | 8 |
cSwitch2Dir | 4079 | DO Switch 2 Normally | Define Switch 2 is normally closed or open. | R/W | Enum | 8 |
cSwitch1Type | 4075 | DO Switch 1 Action | Define Switch 1 action. | R/W | Enum | 8 |
cSwitch2Type | 4078 | DO Switch 2 Action | Define Switch 2 action. | R/W | Enum | 8 |
cSwitch1PosLimit | 414D | R/W | Enum | 4096 | ||
cSwitch2PosLimit | 414E | R/W | Enum | 4096 | ||
fSwitch1Value | 4077 | DO Switch 1 Value | The value is set for Position Low / Upper Limits.( Switch 1 Value must be between 0 and 199.99. ) Attention: This is valid under the condition of switch 1 type is Posistion Low/High Limit ), but to some host, like SDC-625, to activate this field maybe need to close / open this page again. | R/W | Float | 8 |
Name | ID | Label | Description | Type | Access | Class |