Loading…
名称 ID 标签 描述 类型 访问 分类
passcode_serv 4067 Service Passcode for service access in SC202 Possible values: 0, 111, 333, 777, 888, 123, 957, 331, 546, 847 读/写 浮点 256
cc_actual 4068 CC act Actual cell constant after calibration 读 浮点 2050
e6lim 4069 E6 lim. Limit for E6 (Conductivity too low) 读/写 浮点 2050
e5lim 406A E5 lim. Limit for E5 (Conductivity too high) 读/写 浮点 2050
sc_temp_sensor 406B Temp.sens Selection of the temperature compensation sensor 读/写 枚举 1024
sc_auto_return 406C Auto.Ret When Auto-return is ON, the converter reverts to the measuring mode from anywhere in the configuration menu, when no button is pressed during the set time interval of 10 minutes 读/写 枚举 1024
sc_percent 401C Percent When Percent by weight is ON, the 0% and 100% points can be entered 读/写 枚举 1024
sc_ma_burn 406D Burn func. Diagnostic error messages can signal a problem by sending the output signals upscale or downscale (22mA or 3.9mA). The Pulse burnout setting gives a 22mA signal for the first 30 seconds of an alarm condition. After the pulse the signal returns to normal to activate a latching alarm 读/写 枚举 1024
sc_polcheck 406E Pol.check When Polarisation check is ON, error 1 will be displayed in case of polirisation 读/写 枚举 1024
sc_fourelec 406F Electrodes Selection of the number of electrodes in the sensor 读/写 枚举 1024
名称 ID 标签 描述 类型 访问 分类