变量名称： var_ds_fLDampingEdit

变量ID： 0x41CB

变量标签： Time Constant

变量描述： Time Constant Shows the current time constant. The time constant is either calculated automatically (factory setting), or manually set to a fixed value. The time constant smoothes the output signal. Statistical fluctuations, as well as level fluctuations due to the process, e.g. by agitators, are smoothed. The value of the time constant corresponds approximately to the response time of the measurement. Depending on the setting in "Evaluation Mode", either the calculated time constant is displayed (AUTO SET) or a time can be entered in seconds (MANUAL SET). We recommend using the automatic calculation (AUTO SET), unless important reasons speak against it. For manual input please keep in mind: The time constant must be sufficiently large to avoid incorrect switching. At the same time, however, an increase in the time constant will delay the reaction of the measurement to a level exceedance; therefore, the time constant should not be selected too large. A time constant of 20 seconds is a good choice for standard applications and correct source detector configurations.

变量处理： 读/写

变量分类： Correction

变量长度： 4

变量数据类型： 浮点

变量显示格式： |en|.2f

变量编辑格式： |en|.2f

变量单位：

变量最大值：

变量最小值：

变量读取命令列表

命令号	命令ID	命令名称
237	423B	cmd_rd_calibration_parameters

变量写入命令列表

命令号	命令ID	命令名称
238	423C	cmd_wr_calibration_parameters