变量名称： IpConverter_ipOffsetVenting

变量ID： 0x427E

变量标签： Y Offset Up

变量描述： The offset for the output signal linearizes the behavior of the I/P module used and enables rapid compensation even in the case of small control deviations. The value is limited at the low end by a minimum value (neutral zone).The offset substantially affects the controlling speed for control deviations smaller than 5 %.To compensate for existing dissymmetries in the controlled system, the offset should be set separately for both directions (up/down).For most actuators, a satisfactory control response is achieved with offset values between 40 and 80 %. If, in the event of setpoint changes, the control response demonstrates an overshoot of less than 2 %, both offset values should be decreased.Both offset values should be increased when the actuator stops outside the tolerance band.Use this parameter to adjust the Y offset for the positioning direction down (towards 0 %)

变量处理： 读/写

变量分类： Correction

变量长度： 4

变量数据类型： 浮点

变量显示格式： |en|5.1f

变量编辑格式： |en|5.1f

变量单位：

变量最大值： 100

变量最小值： 0

变量读取命令列表

无

变量写入命令列表

无